JRC
Plot 500F
Fishfinder/Plotter
PLOT 500F Plotter/Fish Finder
PLOT
500F
Plotter/Fish Finder
6.5" Color LCD
Dual Frequency: 200 and 50 kHz
Split Screen Display
C-Map NT Plus Charts
High-Resolution Bright
Screen
Power Output: 600W
Power Supply: 10 - 41VDC, 140W
The
Plot 500F is a combination of the FF50 fish finder and a C-MAP chart
plotter. With this system you now have all of the features of a high end
sounder, combined with the navigation features of C-MAP NT PLUS. Utilizing
a 6.5″ sunlight viewable LCD color display, the sounder is a 600W,
50kHz / 200kHz Dual Frequency fish finder, with a depth range of up to 5,000
feet. When combined with a GPS (GPS 112W or DGPS 212W), you gain all the
navigational features that C-MAP has to offer including tide graphs and port
service information. This system comes with the GPS 112W WAAS sensor
Free!!!
Standard Plotter
Features
Display
6.5” Color high definition, sunlight
viewable, TFT LCD
50kHz / 200kHz Dual Frequency
operation
600W RMS, 4800W p-p Transmitting
power
Auto Range and Sensitivity
settings
Graphical Display
Wind Direction and Speed (VMG
needs NMEA data)
Tide Graph and Port Service guide
by C-MAP
PC Interface Port
RS232C interface for editing
Waypoints and Routes
Standard
Specifications
Display
6.5” Color TFT LCD (234 x
320)
Depth Unit
Feet, fathoms, meters, Special
Programmable (SP) units
Speed Unit
Knots, mile/h,
km/h
Water Temperature reading in º
Celsius or º Fahrenheit
Alarms
Fish, Shallow, Deep, Temp.
(upper), Temp. (lower), Temp Rate,
Arrival, Anchor,
Off Course, Zone, Speed (upper), Speed
(lower)
Trip, Time, Count Down
Nav
Interface GPS
(Direct connection to GPS 112W, DGPS 212W via
NMEA)
NMEA0183
Input Sentences
GGA, RMC, GLL, VTG, MTW, HDT, HDG, HDM, VWR, VWT,
MVW
Output Sentences
GGA, RMB, RMC, GLL, VTG, APB, BWC, BOD, XTE, DPT, DBT,
MTW
Simulator
Built-in
Power
Requirements
12V – 24VDC, Approx. 25W
Water
Resistance
Ipx5 (IEC 60529)
Chart Plotter Specifications
Display
Mode
Chart Plotting, CDI / COMPASS, Numerical Data, Wind
Direction
Chart-Graphic Data
C-MAP NT PLUS (2
slots)
Chart Scale
1/1000 to 1/17,000,000 (if chart
graphic data is available)
Waypoints
1,000
Waypoints
Routes
40 Routes (100 Waypoints per
Route)
Track and Mark Memory
10,000 Points (total
including vessel’s Track)
Selectable Mark
types
Mark:
2,000 to 9,000 Points (including Waypoint
data)
Track:
1,000 to 8,000 Points
Fishfinder
Specifications
Display Mode
Standard (Low
Frequency, High Frequency, Dual
Frequency)
STD/A-scope (LF, HF, Dual Frequency),
STD/Zoom (LF, HF)
STD/Auto Zoom (LF, HF) STD/Bottom
Lock (LF, HF)
Bottom Discrimination (LF,
HF)
Range
Auto or Manual: 10 to 5,000ft, 5 to
1500m, 3 to100fm
Shift
Auto or Manual: 0 to
3,000ft, 0 to 1,000m, 0~600fm
Frequency
50kHz/200kHz (Dual
Frequency operation)
Transmitting Power
600W
RMS
Boat Speed
0 to 70 knots (through the
water)
Standard System Includes
JLS-500
Display
CFQ-6382
4.92'
(1.5m) Power cable w/ 2 pin connector
MPTG30914
Flush
mount kit
MTV303227
Display sun
cover
5MBBB00002
Suppression
ferrite
JLR-4330W
GPS-112W WAAS sensor FREE ($379
value)
5ZPAD00362
Spares
5JWHZ00075
NMEA
connector (5-pin)
OPERP500F (7ZPBS2107)
Operation
manual
Notes
*Requires connection to External
sensors