JRC 1800 CP
Radar
RADAR 1800CP Radar/Plotter 6.5" Color
LCD
RADAR 1800CP
Radar/Plotter
6.5" Color LCD
2 kW, 24NM, 18" Dome
Bright Screen, Daylight Viewable
C-Map NT Plus Charts
Power Supply: 10.2 - 16VDC, 50W
The Radar
1800CP utilizes software developed from our high seas radars. Utilizing
our new low noise amplifier, target performance rivals previous 4kW
radars. The bright, color LCD display is sunlight viewable and
weatherproof. The unique Jog Dial and Joystick operation give you simple
adjustments of Gain, Tuning and Sea Clutter. Display can be split to show
the radar image and the built in C-MAP plotter, or have full screen
displays. This system comes with the GPS 112W WAAS sensor
Free!!!
Standard Radar Features
Display
6.5"
Bright color LCD (320 x 234) sunlight viewable, water resistant
display
Antenna
18" Radome with high-speed 32RPM target
update
Power Output
2kW Transmitter output with power
saver
Range
9 Range scales from 1/8 to 24NM
Range
Alarms
Approach and Departure Guard
zones
IF Bandwidth
Dual IF bandwidth 10MHz,
3MHz
Power Requirements
10.2 - 16VDC,
<50W
Display Functions
Display modes for Radar, Chart
Plotter, Radar/Chart Plotter, Nav Data, Compass Rose and Wind.
Offset mode
Joystick operation for easy
cursor and menu functions
Jog Dial for easy correction of
Range, Sea Clutter, Rain Clutter, and Gain
Automatic tuning
of radar functions for simple operation
Approach and
Departure Guard zones
Electronic Bearing Line (EBL) and
Variable Range Marker (VRM)
Target expansion magnifies weak
or small targets
Language Capability
English, French, German,
Spanish, Norwegian, Italian
NMEA 0183 input*
MOB, Vessel Position, Target Range,
Bearing, Speed, and Course.
Graphic display will show True
and Apparent Wind Speed with VMG, when tied in with a wind speed indicator that
supplies NMEA data output.
Graphic display of Water
Temperature, Depth, and Speed when connected to a sounder that outputs NMEA like
the FF-50.
Input from External Devices
GGA, GLL, VTG, RMC,
HDG, HDT, HDM, MTW, VHW, MWV,
VWR, VWT, DBT,
DPT
Output to External Device
APB, BOD, GGA, GLL, RMC,
RMB, VTG, XTE, BWC, OSD, RSD
Plotter Functions
Uses C-MAP NT
PLUS cartography
Scales
1/1,000 to 1/100,000
Waypoint
Memory
1,000 Waypoints and 40 Routes (100 Waypoints per route)
Track/Mark Memory
10,000 Points total w/selectable Mark types
(shared between Mark and Track)
Mark
2,000 to 9,000 Points (including
Waypoint
data)
Track
1,000 to 8,000
Points
Alarm
Arrival, Off-Course, and Guard Zone, Speed
(upper/lower), Trip, Clock Count Down and Anchor
NMEA Data
input*
Graphic display of Compass, Wind Speed/Direction and
VMG**
Tide graph and port service guide by
C-Map
Memory backup using C-Map RAM
card.
Connect to PC using RS-232C Interface port for Waypoint
& Route editing and future software updates***
Standard System
Includes
NCD-4300
Display
NKE-1065
18"
Radome antenna
CFQ-6532
6.6' (2m) Power
cable
CFQ-6531-10
33' (10m) Antenna
cable (Standard)
MPTG30914
Flush mounting
bracket
MTV303270
Display
cover
7ZXRD0004
Spare parts
OPER1800
(7ZPRD0551)
Operation manual
JLR-4330W
GPS 112W
WAAS sensor FREE ($379 value)
5JWHZ00075
NMEA
connector (5 pin)
Scanner Specifications
Antenna
18" Radome antenna
Beam
Width
Horizontal: 5.2°
Vertical: 30º
9445MHz + 30MHz
IF
Bandwidth
10MHz/3MHz
Peak Power
2kW
Notes
*Requires connection to External sensors
**Requires data input from a speed and wind
indicator.
***Requires JRC supplied software