Furuno BBFF3 Navnet Network
Sounder
Furuno's new BBFF3 high power, network sounder is your key to
finding more fish. This network fish finder connects directly to a NavNet
display or an Ethernet hub with a single Ethernet cable. If it is connected to
an Ethernet hub that has multiple displays attached, each of those displays will
have access to the fish finder features.
The unit itself can be configured as
a 1, 2 or 3 kW RMS output, dual frequency sounder. You may choose low frequency,
high frequency or both at the touch of a key and obtain detailed echoes of
bottom structure and fish using phased range scales up to 2,400 meters. It also
utilizes Furuno's Free Synthesizer (FFS) transceiver which means you can easily
select from a broad range of frequencies.
The BBFF3 turns any NavNet display into one of the most powerful
fish finders available on the market today. And because it is being used on a
NavNet display, you can split the screen with other NavNet features like: Radar,
Chart Plotter, NavData and even Video, depending on which NavNet unit you
have.
Standard Features
1, 2 or 3 kW Optional Output Power set by
internal jumper
Dual Frequency, Select two from 28, 38, 50, 88 or 200 kHz
Furuno Free Synthesizer (FFS) Transceiver allows easy selection of operating
frequency
8 Range Scales to 3,600 feet
Maximum Range Offset of 3,600
feet
Audible/Visual Alarms for Bottom, Fish or Water Temp. Changes *
A-Scope Feature for Rapid Detection & ID of Fish and Bottom Conditions
Selectable Screen Colors, Including White on color displays only
A
Variety of User Friendly Display modes:
1. Display Both High and Low
Frequencies
2. Display Either High or Low Frequency
3. Marker Zoom or
Bottom Zoom Display
4. Bottom Lock Display with Fish Alarm
Automatic Depth Range & Gain Settings
Range Scale
Calibration in Feet, Fathoms or Meters
Variable Range Marker & Target
Simulator Built-in
Seven Settings of Picture Advance Speed & Minute
Markers
Ethernet 10Base-T Network Protocol
Six Levels of Signal
Rejection Level & Noise Limiter
Shipping Information
13 Lbs., 1 Carton less Transducer
Shipped at 1 kW power
setting
Power Requirements
12/24 VDC, 30 watts
Notes
Used with NavNet Color LCD Monochrome LCD and CRT Displays
