Furuno BBFF1 Navnet Network
Sounder
Furuno's new BBFF1 Network Sounder can turn any NavNet display
into a powerful, dual-frequency fish finder. This compact network sounder
connects directly to a NavNet display or an Ethernet hub with a single Ethernet
cable. If it is connected to an Ethernet hub that has multiple displays
attached, each of those displays will have access to the Network Sounder.
The
sounder itself has a selectable 600W or 1kW output power. You may choose LF
(50kHz), HF (200kHz) or both at the touch of a key and obtain detailed echoes of
bottom structure and fish using range scales of up to 5,000 ft. And because the
Network Sounder is used on a NavNet display, you will also be able to use its
Radar and Chart Plotter features depending on which unit you have.
Standard
Features
600 Watt RMS (4800 P-P) Output Power, 50/200 kHz Transceivers
1
kW Optional Output Power
8 Range Scales to 4,000 feet
Maximum Range
Offset of 4,500 feet, Maximum Range Scale of 8,000 feet
Audible/Visual
Alarms for Bottom, Fish or Water Temp. Changes *
A-Scope Feature for Rapid
Detection & ID of Fish and Bottom Conditions
Selectable Screen Colors,
Including White on color displays
A Variety of User Friendly Display modes:
Display Both High (200 kHz) and Low (50 kHz) Frequencies
Display Either
(200 kHz) or (50 kHz) Frequency
Marker Zoom or Bottom Zoom Display
Bottom Lock Display with Fish Alarm
Alphanumeric Displays of Vessel
Speed, Water Temp. & XTE **
Automatic Depth Range & Gain Settings
Range Scale Calibration in Feet, Fathoms or Meters
Variable Range Marker
& Target Simulator Built-in
Seven Settings of Picture Advance Speed
& Minute Markers
Six Levels of Signal Rejection Level & Noise
Limiter
10-Pin Transducer/Multisensor Connection
Shipping Information
7 lbs., 1 Carton
Power Requirements
12 or 24 VDC, 1.5 Watts
Notes
* Optional Temperature Sensor Input Required
** Appropriate
Nav data Input Required
*** Price less transducer